Shop everything

The CHE-0078 is a professional compass for mounting on the wheelhouse ceiling, suitable for coastal vessels, workboats, and large yachts. The 125 mm flat card has 1° graduations, rotates on a hardened steel pivot with a sapphire bearing, and is illuminated at 12–24 V. B+C correctors are built-in; quadrantal correctors for steel hulls are optional.

The C20-00137 is a class A steering compass on a bracket made of seawater-resistant aluminum, featuring a 125 mm card with 1° graduations that also allows for taking bearings. It complies with MED (Wheelmark), USCG, and UK MER standards, includes quadrantal correctors for steel hulls, and is ready for an NMEA 0183 sensor to drive repeaters, heading alarms, and navigation equipment. Installation via deck stand, on deck, bulkhead, or panel.

The C20-00130 is a compact reflector compass for medium-sized commercial vessels, fishing vessels, workboats, and offshore applications, intended for areas where space is limited. The set consists of a 125 mm card in a compass housing made of seawater-resistant aluminum, with built-in B+C compensation, periscope, main and emergency lighting, and a protective cover. It is fully sealed for outdoor installation in accordance with IEC 60945 and is prepared for an NMEA 0183 sensor.

The C20-00128 is a Class A compass in a seawater-resistant aluminum binnacle, suitable for use as a table compass or, with the C20-00135 periscope, as a reflector compass. The 125 mm card features 1° graduations and a directional error of less than 0.5°, and includes quadrantal correctors for steel hulls. Designed for mid-sized commercial vessels, fishing boats, workboats, and yachts, it comes with a waterproof fabric cover and is prepared for an NMEA 0183 sensor.

The C20-00135 is a class A periscope that allows you to read the C20-00128 compass from below, enabling the compass to be positioned outside the wheelhouse as a reflector compass. It features a wide field of view and its own 12/24 V lighting. The periscope is intended exclusively for the C20-00128.

The C20-00131 is a class A spare compass in a wooden box, with a 125 mm flat card and 1° graduations. It is intended for service vessels and fishing, as a table compass or as a spare for a reflector compass, and the box protects it until you need it. An azimuth ring or sights are available as an option.

The CHH-0090 is a traditional lifeboat compass: an externally gimballed compass in a weatherproof ABS housing. The 100 mm flat card has 2.5° graduations and a lubber line, and the lighting is a 1.5 V waterproof LED unit that clips on and can be stored separately when not in use. The compass complies with IMPA code 330211 for 100 mm lifeboat compasses.

The C4-00108 is a compact compass in a lacquered wooden box, intended for small boats, lifeboats, and rescue boats. The 85 mm flat card has a scale per 5° and is illuminated by a 1.5 V battery-powered LED. You can mount the box permanently on a horizontal surface or store it safely until it is needed.

The TAX-00122 is a pelorus: a non-magnetic bearing ring for relative bearings, used to estimate crossing vessels, determine when a beacon is abeam, or calculate your distance from a navigation point. Compass adjusters use it to determine deviation by comparing the compass heading with the azimuth of the sun or a known bearing. The 125 mm card with 1° graduations is gimbal-mounted in a natural wood plywood box.

The C20-00132 is a sensor coil that is mounted under an external gimballed Autonautic compass, turning it into a Transmitting Magnetic Compass (TMC). The sensor measures the magnetic field and outputs the heading as an NMEA 0183 sentence; because it is aligned to the card, the heading read out always matches what you see on the compass. The sensor is mounted and calibrated on the compass at the Autonautic workshop and is ready for use as soon as it is powered.

The C4-00114 is a traditional compass in a varnished wooden box, intended for small boats, lifeboats, and rescue craft. The 100 mm flat card has a 2.5° scale and a lubber line; you mount the box on a horizontal surface or store it safely until needed. Lighting is optional for this model.

The C20-00136 is an azimuth circle that you place on an Autonautic C20 compass to take accurate bearings. It fits the C20-00128, C20-00130, C20-00131, C20-00137, and C20-00138. Because the azimuth circle is calibrated to the compass at the factory, you should order it at the same time as the compass.

The C20-00133 is an analog heading repeater with a rotating compass card in a 110 mm square housing. It displays the heading from an NMEA 0183 source, such as the C20-00132 compass sensor, at a second location on board: in the cockpit, at the chart table, or in the saloon. Mounting is surface-mounted without a cutout, requiring only a small cable hole, and the housing is waterproof according to IP68.

The CHH-0096 is a fully gimbaled magnetic compass in a traditional design, mounted on a bracket made of seawater-resistant aluminum with a deck base. The bracket can be positioned in any orientation and is instantly removable, making it suitable for sailboats and motorboats, and especially for boats with a closed cockpit. The fluid-filled card remains stable and is easy to read both day and night.

A pelorus is a non-magnetic bearing circle used for taking relative bearings: you can see whether the bearing of another ship is changing and check your compass against the sun or stars. The TAX-00123 has a 125 mm gimbal-mounted card with 1° graduations, a shadow pin, and two sights on an aluminum flange. You secure it to a fixed mounting plate on deck using a thumbscrew, and after use, it is returned to the second plate in the plywood storage box.

The B+C corrector set consists of two identical units: one corrects the B-deviation caused by the ship's longitudinal magnetic field, the other the C-deviation caused by the athwartships field. Each unit corrects 35 to 40° using movable alnico magnets in a black stove-enamelled aluminium housing. The set is designed for Autonautic C20 compasses and fits many other compasses.

The C2 Kayak is a compact deck-mount compass for kayaks, which you attach to the deck lines in front of you without drilling, using elastic cords and UV-resistant nylon clips. This way, you can see your heading at a glance, even in river bends, at side channels, and when your destination is not yet in sight. The compass is completely waterproof, features a scratch-resistant dome, and an adjustable glare shield.

The A130TH2 combines a thermometer and a hygrometer on a generously sized dial. The blue hand displays the temperature, the red one the relative humidity, so you can see from a distance whether the indoor climate remains comfortable or if ventilation is needed. Operates without electricity, behind mineral glass in a mirror-polished stainless steel housing.

The A130BTH combines a Hi-Sensitive barometer, a thermometer, and a hygrometer into one 150 mm instrument. You can read the air pressure, temperature, and relative humidity on a single dial, bringing weather and indoor climate into view together. Operates without power, behind mineral glass in a mirror-polished stainless steel housing.

The A130IM is a 150 mm tide clock that tracks the tidal cycle, indicating whether the tide is rising or falling. You set it to the high tide of your home port, after which it runs independently. The dial is printed in English and French, set behind mineral glass in a mirror-polished stainless steel case.

The A103C is a quartz ship's clock in a titanium-colored housing with a fluorescent, two-tone printed dial. Red and green sectors mark the radio silence periods; blue hands and a red second hand keep the display clear, even as light fades. The clock comes with a quick-lock mounting ring: attach the ring to the wall, twist the clock on.

The A130B is a 150 mm aneroid barometer with a Hi-Sensitive mechanism that amplifies the needle movement by 1.5 times. This allows you to spot an initial change in pressure sooner, and thanks to its size, from across the room as well. The housing is made of mirror-polished 18/10 stainless steel; the instrument operates without power.

The A104IM is a tide indicator that tracks the tidal cycle and shows whether the tide is coming in or going out. You set it to the high tide of your home port, and it then runs independently. The light ivory dial is printed in English and French, and the housing is mirror-polished stainless steel.